com.sun.javatest.exec
Class ExecTool

java.lang.Object
  java.awt.Component
      java.awt.Container
          javax.swing.JComponent
              javax.swing.JPanel
                  com.sun.javatest.tool.Tool
                      com.sun.javatest.exec.ExecTool

All Implemented Interfaces:

BasicSession.OrderedObserver, ExecModel, Session.Observer, java.awt.image.ImageObserver, java.awt.MenuContainer, java.io.Serializable, javax.accessibility.Accessible

public class ExecTool
extends Tool
implements ExecModel, BasicSession.OrderedObserver

See Also:

Serialized Form

Nested Class Summary

Nested classes/interfaces inherited from class com.sun.javatest.tool.Tool

Tool.Observer

Nested classes/interfaces inherited from class javax.swing.JPanel

javax.swing.JPanel.AccessibleJPanel

Nested classes/interfaces inherited from class javax.swing.JComponent

javax.swing.JComponent.AccessibleJComponent

Nested classes/interfaces inherited from class java.awt.Container

java.awt.Container.AccessibleAWTContainer

Nested classes/interfaces inherited from class java.awt.Component

java.awt.Component.AccessibleAWTComponent, java.awt.Component.BaselineResizeBehavior, java.awt.Component.BltBufferStrategy, java.awt.Component.FlipBufferStrategy

Field Summary

Fields inherited from class com.sun.javatest.tool.Tool

uif

Fields inherited from class javax.swing.JComponent

accessibleContext, listenerList, TOOL_TIP_TEXT_KEY, ui, UNDEFINED_CONDITION, WHEN_ANCESTOR_OF_FOCUSED_COMPONENT, WHEN_FOCUSED, WHEN_IN_FOCUSED_WINDOW

Fields inherited from class java.awt.Component

BOTTOM_ALIGNMENT, CENTER_ALIGNMENT, LEFT_ALIGNMENT, RIGHT_ALIGNMENT, TOP_ALIGNMENT

Fields inherited from interface java.awt.image.ImageObserver

ABORT, ALLBITS, ERROR, FRAMEBITS, HEIGHT, PROPERTIES, SOMEBITS, WIDTH

Constructor Summary

ExecTool(ExecToolManager mgr, TestSuite ts)

Method Summary

void	configure() Causes a series of actions to be performed to complete configuration.
static ContextManager	createContextManager(TestSuite ts)
void	dispose() Release any resources this tool may be referencing.
TestResultTable	getActiveTestResultTable() Get the test result table currently in use for display.
ContextManager	getContextManager()
ExecToolManager	getExecToolManager()
FilterConfig	getFilterConfig()
InterviewParameters	getInterviewParameters()
TestSuite[]	getLoadedTestSuites() Get a list of any test suites that are being used by this tool.
javax.swing.JMenuBar	getMenuBar() Get the menu bar for a tool.
TestSuite	getTestSuite()
protected javax.swing.JToolBar	getToolBar()
UIFactory	getUIF()
WorkDirectory	getWorkDirectory()
protected void	initGUI()
boolean	isConfiguring() Returns true if the model is in the configuration stage, user is either selecting work directory or editing configuration.
boolean	isQuickStartWizardShowing()
int	order() BasicSession.OrderedObserver interface method.
void	print(java.awt.print.Printable p)
void	printSetup()
protected void	restore(java.util.Map m) Restore information about a tool from a map, and configure the tool according this information.
void	runTests() Invoked after QSW
void	runTests(java.lang.String[] urls) Run specified tests.
protected void	save(java.util.Map m) Save information about a tool in a map, so that the tool can be restored in a later invocation of JT Harness.
void	setVisible(boolean f)
void	setWorkDir(WorkDirectory wd, boolean addToFileHistory)
void	showConfigEditor() Invoked after QSW
void	showConfigEditor(boolean runTests) Show the configuration editor for this tool, and optionally run the tests defined by the configuration when the editor is closed.
void	showMessage(java.util.ResourceBundle msgs, java.lang.String key)
void	showQuickStartWizard()
void	showTemplateEditor() Show the configuration editor for this tool with current template
void	showWorkDirDialog(boolean allowTemplates)
void	update(InterviewParameters ip) Invoked when manager orders to use new ip
void	update(WorkDirectory wd) Invoked when manager orders to use new wd.
void	updated(Session.Event e) Session.Observer interface method

Methods inherited from class com.sun.javatest.tool.Tool

addObserver, getCloseAlerts, getCreationTime, getDesktop, getHelpBroker, getLoadedWorkDirectories, getManager, getShortTitle, getTitle, getToolDialogs, removeObserver, setHelp, setHelp, setHelpOnButton, setI18NTitle, setI18NTitle, setI18NTitle, setShortTitle

Methods inherited from class javax.swing.JPanel

getAccessibleContext, getUI, getUIClassID, paramString, setUI, updateUI

Methods inherited from class javax.swing.JComponent

addAncestorListener, addNotify, addVetoableChangeListener, computeVisibleRect, contains, createToolTip, disable, enable, firePropertyChange, firePropertyChange, firePropertyChange, fireVetoableChange, getActionForKeyStroke, getActionMap, getAlignmentX, getAlignmentY, getAncestorListeners, getAutoscrolls, getBaseline, getBaselineResizeBehavior, getBorder, getBounds, getClientProperty, getComponentGraphics, getComponentPopupMenu, getConditionForKeyStroke, getDebugGraphicsOptions, getDefaultLocale, getFontMetrics, getGraphics, getHeight, getInheritsPopupMenu, getInputMap, getInputMap, getInputVerifier, getInsets, getInsets, getListeners, getLocation, getMaximumSize, getMinimumSize, getNextFocusableComponent, getPopupLocation, getPreferredSize, getRegisteredKeyStrokes, getRootPane, getSize, getToolTipLocation, getToolTipText, getToolTipText, getTopLevelAncestor, getTransferHandler, getVerifyInputWhenFocusTarget, getVetoableChangeListeners, getVisibleRect, getWidth, getX, getY, grabFocus, isDoubleBuffered, isLightweightComponent, isManagingFocus, isOpaque, isOptimizedDrawingEnabled, isPaintingForPrint, isPaintingTile, isRequestFocusEnabled, isValidateRoot, paint, paintBorder, paintChildren, paintComponent, paintImmediately, paintImmediately, print, printAll, printBorder, printChildren, printComponent, processComponentKeyEvent, processKeyBinding, processKeyEvent, processMouseEvent, processMouseMotionEvent, putClientProperty, registerKeyboardAction, registerKeyboardAction, removeAncestorListener, removeNotify, removeVetoableChangeListener, repaint, repaint, requestDefaultFocus, requestFocus, requestFocus, requestFocusInWindow, requestFocusInWindow, resetKeyboardActions, reshape, revalidate, scrollRectToVisible, setActionMap, setAlignmentX, setAlignmentY, setAutoscrolls, setBackground, setBorder, setComponentPopupMenu, setDebugGraphicsOptions, setDefaultLocale, setDoubleBuffered, setEnabled, setFocusTraversalKeys, setFont, setForeground, setInheritsPopupMenu, setInputMap, setInputVerifier, setMaximumSize, setMinimumSize, setNextFocusableComponent, setOpaque, setPreferredSize, setRequestFocusEnabled, setToolTipText, setTransferHandler, setUI, setVerifyInputWhenFocusTarget, unregisterKeyboardAction, update

Methods inherited from class java.awt.Container

add, add, add, add, add, addContainerListener, addImpl, addPropertyChangeListener, addPropertyChangeListener, applyComponentOrientation, areFocusTraversalKeysSet, countComponents, deliverEvent, doLayout, findComponentAt, findComponentAt, getComponent, getComponentAt, getComponentAt, getComponentCount, getComponents, getComponentZOrder, getContainerListeners, getFocusTraversalKeys, getFocusTraversalPolicy, getLayout, getMousePosition, insets, invalidate, isAncestorOf, isFocusCycleRoot, isFocusCycleRoot, isFocusTraversalPolicyProvider, isFocusTraversalPolicySet, layout, list, list, locate, minimumSize, paintComponents, preferredSize, printComponents, processContainerEvent, processEvent, remove, remove, removeAll, removeContainerListener, setComponentZOrder, setFocusCycleRoot, setFocusTraversalPolicy, setFocusTraversalPolicyProvider, setLayout, transferFocusBackward, transferFocusDownCycle, validate, validateTree

Methods inherited from class java.awt.Component

action, add, addComponentListener, addFocusListener, addHierarchyBoundsListener, addHierarchyListener, addInputMethodListener, addKeyListener, addMouseListener, addMouseMotionListener, addMouseWheelListener, bounds, checkImage, checkImage, coalesceEvents, contains, createImage, createImage, createVolatileImage, createVolatileImage, disableEvents, dispatchEvent, enable, enableEvents, enableInputMethods, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, getBackground, getBounds, getColorModel, getComponentListeners, getComponentOrientation, getCursor, getDropTarget, getFocusCycleRootAncestor, getFocusListeners, getFocusTraversalKeysEnabled, getFont, getForeground, getGraphicsConfiguration, getHierarchyBoundsListeners, getHierarchyListeners, getIgnoreRepaint, getInputContext, getInputMethodListeners, getInputMethodRequests, getKeyListeners, getLocale, getLocation, getLocationOnScreen, getMouseListeners, getMouseMotionListeners, getMousePosition, getMouseWheelListeners, getName, getParent, getPeer, getPropertyChangeListeners, getPropertyChangeListeners, getSize, getToolkit, getTreeLock, gotFocus, handleEvent, hasFocus, hide, imageUpdate, inside, isBackgroundSet, isCursorSet, isDisplayable, isEnabled, isFocusable, isFocusOwner, isFocusTraversable, isFontSet, isForegroundSet, isLightweight, isMaximumSizeSet, isMinimumSizeSet, isPreferredSizeSet, isShowing, isValid, isVisible, keyDown, keyUp, list, list, list, location, lostFocus, mouseDown, mouseDrag, mouseEnter, mouseExit, mouseMove, mouseUp, move, nextFocus, paintAll, postEvent, prepareImage, prepareImage, processComponentEvent, processFocusEvent, processHierarchyBoundsEvent, processHierarchyEvent, processInputMethodEvent, processMouseWheelEvent, remove, removeComponentListener, removeFocusListener, removeHierarchyBoundsListener, removeHierarchyListener, removeInputMethodListener, removeKeyListener, removeMouseListener, removeMouseMotionListener, removeMouseWheelListener, removePropertyChangeListener, removePropertyChangeListener, repaint, repaint, repaint, resize, resize, setBounds, setBounds, setComponentOrientation, setCursor, setDropTarget, setFocusable, setFocusTraversalKeysEnabled, setIgnoreRepaint, setLocale, setLocation, setLocation, setName, setSize, setSize, show, show, size, toString, transferFocus, transferFocusUpCycle

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Constructor Detail

ExecTool

public ExecTool(ExecToolManager mgr,
                TestSuite ts)
         throws Session.Fault

Throws:

Session.Fault

Method Detail

createContextManager

public static ContextManager createContextManager(TestSuite ts)

getUIF

public UIFactory getUIF()

getMenuBar

public javax.swing.JMenuBar getMenuBar()

Description copied from class: Tool

Get the menu bar for a tool. This should just contain the tool-specific menus. The desktop will automatically add and display the standard menus on the menu bar.

Specified by:

getMenuBar in class Tool

Returns:

a menu bar containing tool-specific menus

getToolBar

protected javax.swing.JToolBar getToolBar()

setVisible

public void setVisible(boolean f)

Overrides:

setVisible in class javax.swing.JComponent

initGUI

protected void initGUI()

save

protected void save(java.util.Map m)

Description copied from class: Tool

Save information about a tool in a map, so that the tool can be restored in a later invocation of JT Harness. The tool must also implement the following method public static Tool restore(Map m) which will be invoked to recreate the tool.

Specified by:

save in class Tool

Parameters:

m - the map in which to store the significant state of the tool

restore

protected void restore(java.util.Map m)

Description copied from class: Tool

Restore information about a tool from a map, and configure the tool according this information.

Specified by:

restore in class Tool

Parameters:

m - the map in which to store the significant state of the tool

dispose

public void dispose()

Description copied from class: Tool

Release any resources this tool may be referencing. This is for "destroying" this tool instance.

Overrides:

dispose in class Tool

getTestSuite

public TestSuite getTestSuite()

Specified by:

getTestSuite in interface ExecModel

getLoadedTestSuites

public TestSuite[] getLoadedTestSuites()

Description copied from class: Tool

Get a list of any test suites that are being used by this tool.

Overrides:

getLoadedTestSuites in class Tool

Returns:

Array of 1 element - the current testSuite

getWorkDirectory

public WorkDirectory getWorkDirectory()

Specified by:

getWorkDirectory in interface ExecModel

getInterviewParameters

public InterviewParameters getInterviewParameters()

Specified by:

getInterviewParameters in interface ExecModel

getFilterConfig

public FilterConfig getFilterConfig()

Specified by:

getFilterConfig in interface ExecModel

getContextManager

public ContextManager getContextManager()

Specified by:

getContextManager in interface ExecModel

getActiveTestResultTable

public TestResultTable getActiveTestResultTable()

Description copied from interface: ExecModel

Get the test result table currently in use for display. This value provides a temporary answer if the work directory does not exist yet. If a work directory is available, the query is forwarded to that object.

Specified by:

getActiveTestResultTable in interface ExecModel

Returns:

the test result table currently in use for display.

update

public void update(WorkDirectory wd)
            throws Session.Fault

Invoked when manager orders to use new wd.

Parameters:

wd -

Throws:

Session.Fault

update

public void update(InterviewParameters ip)
            throws Session.Fault

Invoked when manager orders to use new ip

Parameters:

ip -

Throws:

Session.Fault

updated

public void updated(Session.Event e)

Session.Observer interface method

Specified by:

updated in interface Session.Observer

Parameters:

e -

order

public int order()

BasicSession.OrderedObserver interface method.

Specified by:

order in interface BasicSession.OrderedObserver

showWorkDirDialog

public void showWorkDirDialog(boolean allowTemplates)

Specified by:

showWorkDirDialog in interface ExecModel

showConfigEditor

public void showConfigEditor(boolean runTests)

Description copied from interface: ExecModel

Show the configuration editor for this tool, and optionally run the tests defined by the configuration when the editor is closed.

Specified by:

showConfigEditor in interface ExecModel

Parameters:

runTests - true if the tests should automatically be run when the user closes the configuration editor, and false otherwise.

showTemplateEditor

public void showTemplateEditor()

Description copied from interface: ExecModel

Show the configuration editor for this tool with current template

Specified by:

showTemplateEditor in interface ExecModel

showConfigEditor

public void showConfigEditor()

Invoked after QSW

runTests

public void runTests()

Invoked after QSW

runTests

public void runTests(java.lang.String[] urls)

Description copied from interface: ExecModel

Run specified tests.

Specified by:

runTests in interface ExecModel

Parameters:

urls - These names may either be paths to folders or test names. Empty string value in the array indicates that the whole test suite should be run.

showMessage

public void showMessage(java.util.ResourceBundle msgs,
                        java.lang.String key)

Specified by:

showMessage in interface ExecModel

printSetup

public void printSetup()

Specified by:

printSetup in interface ExecModel

print

public void print(java.awt.print.Printable p)

Specified by:

print in interface ExecModel

setWorkDir

public void setWorkDir(WorkDirectory wd,
                       boolean addToFileHistory)
                throws Interview.Fault,
                       TestSuite.Fault

Specified by:

setWorkDir in interface ExecModel

Throws:

Interview.Fault

TestSuite.Fault

configure

public void configure()

Causes a series of actions to be performed to complete configuration.

Specified by:

configure in interface ExecModel

isConfiguring

public boolean isConfiguring()

Description copied from interface: ExecModel

Returns true if the model is in the configuration stage, user is either selecting work directory or editing configuration. One can relay on this method to disable/enable some actions.

Specified by:

isConfiguring in interface ExecModel

Returns:

true if configuring is in progress at the moment.

getExecToolManager

public ExecToolManager getExecToolManager()

Specified by:

getExecToolManager in interface ExecModel

showQuickStartWizard

public void showQuickStartWizard()

isQuickStartWizardShowing

public boolean isQuickStartWizardShowing()