javafx.animation.RotateTransition

public final class RotateTransition extends Transition

This Transition creates a rotation animation that spans its duration. This is done by updating the rotate variable of the node at regular intervals. The angle value is specified in degrees.

It starts from the fromAngle if provided else uses the node's rotate value.

It stops at the toAngle value if provided else it will use start value plus byAngle.

The toAngle takes precedence if both toAngle and byAngle are specified.

Code Segment Example:

 
 import javafx.scene.shape.*;
 import javafx.animation.*;

 ...

     Rectangle rect = new Rectangle (100, 40, 100, 100);
     rect.setArcHeight(50);
     rect.setArcWidth(50);
     rect.setFill(Color.VIOLET);

     RotateTransition rt = new RotateTransition(Duration.millis(3000), rect);
     rt.setByAngle(180);
     rt.setCycleCount(4);
     rt.setAutoReverse(true);

     rt.play();

 ...

Since:

JavaFX 2.0

See Also:

Property Summary

Properties

Type

Property

Description

final ObjectProperty<Point3D>

axis

Specifies the axis of rotation for this RotateTransition.

final DoubleProperty

byAngle

Specifies the incremented stop angle value, from the start, of this RotateTransition.

final ObjectProperty<Duration>

duration

The duration of this RotateTransition.

final DoubleProperty

fromAngle

Specifies the start angle value for this RotateTransition.

final ObjectProperty<Node>

node

The target node of this RotateTransition.

final DoubleProperty

toAngle

Specifies the stop angle value for this RotateTransition.

Properties declared in class javafx.animation.Transition
interpolator

Properties declared in class javafx.animation.Animation
autoReverse, currentRate, currentTime, cycleCount, cycleDuration, delay, onFinished, rate, status, totalDuration
Nested Class Summary

Nested classes/interfaces declared in class javafx.animation.Animation
Animation.Status
Field Summary

Fields declared in class javafx.animation.Animation
INDEFINITE
Constructor Summary

Constructors

Constructor

Description

RotateTransition()

The constructor of RotateTransition

RotateTransition(Duration duration)

The constructor of RotateTransition

RotateTransition(Duration duration, Node node)

The constructor of RotateTransition
Method Summary

Modifier and Type

Method

Description

final ObjectProperty<Point3D>

axisProperty()

Specifies the axis of rotation for this RotateTransition.

final DoubleProperty

byAngleProperty()

Specifies the incremented stop angle value, from the start, of this RotateTransition.

final ObjectProperty<Duration>

durationProperty()

The duration of this RotateTransition.

final DoubleProperty

fromAngleProperty()

Specifies the start angle value for this RotateTransition.

final Point3D

getAxis()

Gets the value of the axis property.

final double

getByAngle()

Gets the value of the byAngle property.

final Duration

getDuration()

Gets the value of the duration property.

final double

getFromAngle()

Gets the value of the fromAngle property.

final Node

getNode()

Gets the value of the node property.

final double

getToAngle()

Gets the value of the toAngle property.

protected void

interpolate(double frac)

The method interpolate() has to be provided by implementations of Transition.

final ObjectProperty<Node>

nodeProperty()

The target node of this RotateTransition.

final void

setAxis(Point3D value)

Sets the value of the axis property.

final void

setByAngle(double value)

Sets the value of the byAngle property.

final void

setDuration(Duration value)

Sets the value of the duration property.

final void

setFromAngle(double value)

Sets the value of the fromAngle property.

final void

setNode(Node value)

Sets the value of the node property.

final void

setToAngle(double value)

Sets the value of the toAngle property.

final DoubleProperty

toAngleProperty()

Specifies the stop angle value for this RotateTransition.

Methods declared in class javafx.animation.Transition
getCachedInterpolator, getInterpolator, getParentTargetNode, interpolatorProperty, setInterpolator

Methods declared in class javafx.animation.Animation
autoReverseProperty, currentRateProperty, currentTimeProperty, cycleCountProperty, cycleDurationProperty, delayProperty, getCuePoints, getCurrentRate, getCurrentTime, getCycleCount, getCycleDuration, getDelay, getOnFinished, getRate, getStatus, getTargetFramerate, getTotalDuration, isAutoReverse, jumpTo, jumpTo, onFinishedProperty, pause, play, playFrom, playFrom, playFromStart, rateProperty, setAutoReverse, setCycleCount, setCycleDuration, setDelay, setOnFinished, setRate, setStatus, statusProperty, stop, totalDurationProperty

Methods declared in class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Property Details
- node
  
  public final ObjectProperty<Node> nodeProperty
  
  The target node of this RotateTransition.
  It is not possible to change the target node of a running RotateTransition. If the value of node is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  See Also:
  
  getNode()
  
  setNode(Node)
  
  nodeProperty()
- duration
  
  public final ObjectProperty<Duration> durationProperty
  
  The duration of this RotateTransition.
  It is not possible to change the duration of a running RotateTransition. If the value of duration is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.
  Default value:
  
  400ms
  
  See Also:
  
  getDuration()
  
  setDuration(Duration)
  
  durationProperty()
- axis
  
  public final ObjectProperty<Point3D> axisProperty
  
  Specifies the axis of rotation for this RotateTransition. Use node.rotationAxis for axis of rotation if this axis is null.
  It is not possible to change the axis of a running RotateTransition. If the value of axis is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Default value:
  
  null
  
  See Also:
  
  getAxis()
  
  setAxis(Point3D)
  
  axisProperty()
- fromAngle
  
  public final DoubleProperty fromAngleProperty
  
  Specifies the start angle value for this RotateTransition.
  It is not possible to change fromAngle of a running RotateTransition. If the value of fromAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Default value:
  
  Double.NaN
  
  See Also:
  
  getFromAngle()
  
  setFromAngle(double)
  
  fromAngleProperty()
- toAngle
  
  public final DoubleProperty toAngleProperty
  
  Specifies the stop angle value for this RotateTransition.
  It is not possible to change toAngle of a running RotateTransition. If the value of toAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Default value:
  
  Double.NaN
  
  See Also:
  
  getToAngle()
  
  setToAngle(double)
  
  toAngleProperty()
- byAngle
  
  public final DoubleProperty byAngleProperty
  
  Specifies the incremented stop angle value, from the start, of this RotateTransition.
  It is not possible to change byAngle of a running RotateTransition. If the value of byAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  See Also:
  
  getByAngle()
  
  setByAngle(double)
  
  byAngleProperty()
Constructor Details
- RotateTransition
  
  public RotateTransition(Duration duration, Node node)
  
  The constructor of RotateTransition
  
  Parameters:
  
  duration - The duration of the RotateTransition
  
  node - The node which will be rotated
- RotateTransition
  
  public RotateTransition(Duration duration)
  
  The constructor of RotateTransition
  
  Parameters:
  
  duration - The duration of the RotateTransition
- RotateTransition
  
  public RotateTransition()
  
  The constructor of RotateTransition
Method Details
- setNode
  
  public final void setNode(Node value)
  
  Sets the value of the node property.
  Property description:
  
  The target node of this RotateTransition.
  It is not possible to change the target node of a running RotateTransition. If the value of node is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  
  Parameters:
  
  value - the value for the node property
  
  See Also:
  
  getNode()
  
  nodeProperty()
- getNode
  
  public final Node getNode()
  
  Gets the value of the node property.
  Property description:
  
  The target node of this RotateTransition.
  It is not possible to change the target node of a running RotateTransition. If the value of node is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  
  Returns:
  
  the value of the node property
  
  See Also:
  
  setNode(Node)
  
  nodeProperty()
- nodeProperty
  
  public final ObjectProperty<Node> nodeProperty()
  
  The target node of this RotateTransition.
  It is not possible to change the target node of a running RotateTransition. If the value of node is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Returns:
  
  the node property
  
  See Also:
  
  getNode()
  
  setNode(Node)
- setDuration
  
  public final void setDuration(Duration value)
  
  Sets the value of the duration property.
  Property description:
  
  The duration of this RotateTransition.
  It is not possible to change the duration of a running RotateTransition. If the value of duration is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.
  
  Default value:
  
  400ms
  
  Parameters:
  
  value - the value for the duration property
  
  See Also:
  
  getDuration()
  
  durationProperty()
- getDuration
  
  public final Duration getDuration()
  
  Gets the value of the duration property.
  Property description:
  
  The duration of this RotateTransition.
  It is not possible to change the duration of a running RotateTransition. If the value of duration is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.
  
  Default value:
  
  400ms
  
  Returns:
  
  the value of the duration property
  
  See Also:
  
  setDuration(Duration)
  
  durationProperty()
- durationProperty
  
  public final ObjectProperty<Duration> durationProperty()
  
  The duration of this RotateTransition.
  It is not possible to change the duration of a running RotateTransition. If the value of duration is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.
  Default value:
  
  400ms
  
  Returns:
  
  the duration property
  
  See Also:
  
  getDuration()
  
  setDuration(Duration)
- setAxis
  
  public final void setAxis(Point3D value)
  
  Sets the value of the axis property.
  Property description:
  
  Specifies the axis of rotation for this RotateTransition. Use node.rotationAxis for axis of rotation if this axis is null.
  It is not possible to change the axis of a running RotateTransition. If the value of axis is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  
  Default value:
  
  null
  
  Parameters:
  
  value - the value for the axis property
  
  See Also:
  
  getAxis()
  
  axisProperty()
- getAxis
  
  public final Point3D getAxis()
  
  Gets the value of the axis property.
  Property description:
  
  Specifies the axis of rotation for this RotateTransition. Use node.rotationAxis for axis of rotation if this axis is null.
  It is not possible to change the axis of a running RotateTransition. If the value of axis is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  
  Default value:
  
  null
  
  Returns:
  
  the value of the axis property
  
  See Also:
  
  setAxis(Point3D)
  
  axisProperty()
- axisProperty
  
  public final ObjectProperty<Point3D> axisProperty()
  
  Specifies the axis of rotation for this RotateTransition. Use node.rotationAxis for axis of rotation if this axis is null.
  It is not possible to change the axis of a running RotateTransition. If the value of axis is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Default value:
  
  null
  
  Returns:
  
  the axis property
  
  See Also:
  
  getAxis()
  
  setAxis(Point3D)
- setFromAngle
  
  public final void setFromAngle(double value)
  
  Sets the value of the fromAngle property.
  Property description:
  
  Specifies the start angle value for this RotateTransition.
  It is not possible to change fromAngle of a running RotateTransition. If the value of fromAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  
  Default value:
  
  Double.NaN
  
  Parameters:
  
  value - the value for the fromAngle property
  
  See Also:
  
  getFromAngle()
  
  fromAngleProperty()
- getFromAngle
  
  public final double getFromAngle()
  
  Gets the value of the fromAngle property.
  Property description:
  
  Specifies the start angle value for this RotateTransition.
  It is not possible to change fromAngle of a running RotateTransition. If the value of fromAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  
  Default value:
  
  Double.NaN
  
  Returns:
  
  the value of the fromAngle property
  
  See Also:
  
  setFromAngle(double)
  
  fromAngleProperty()
- fromAngleProperty
  
  public final DoubleProperty fromAngleProperty()
  
  Specifies the start angle value for this RotateTransition.
  It is not possible to change fromAngle of a running RotateTransition. If the value of fromAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Default value:
  
  Double.NaN
  
  Returns:
  
  the fromAngle property
  
  See Also:
  
  getFromAngle()
  
  setFromAngle(double)
- setToAngle
  
  public final void setToAngle(double value)
  
  Sets the value of the toAngle property.
  Property description:
  
  Specifies the stop angle value for this RotateTransition.
  It is not possible to change toAngle of a running RotateTransition. If the value of toAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  
  Default value:
  
  Double.NaN
  
  Parameters:
  
  value - the value for the toAngle property
  
  See Also:
  
  getToAngle()
  
  toAngleProperty()
- getToAngle
  
  public final double getToAngle()
  
  Gets the value of the toAngle property.
  Property description:
  
  Specifies the stop angle value for this RotateTransition.
  It is not possible to change toAngle of a running RotateTransition. If the value of toAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  
  Default value:
  
  Double.NaN
  
  Returns:
  
  the value of the toAngle property
  
  See Also:
  
  setToAngle(double)
  
  toAngleProperty()
- toAngleProperty
  
  public final DoubleProperty toAngleProperty()
  
  Specifies the stop angle value for this RotateTransition.
  It is not possible to change toAngle of a running RotateTransition. If the value of toAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Default value:
  
  Double.NaN
  
  Returns:
  
  the toAngle property
  
  See Also:
  
  getToAngle()
  
  setToAngle(double)
- setByAngle
  
  public final void setByAngle(double value)
  
  Sets the value of the byAngle property.
  Property description:
  
  Specifies the incremented stop angle value, from the start, of this RotateTransition.
  It is not possible to change byAngle of a running RotateTransition. If the value of byAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  
  Parameters:
  
  value - the value for the byAngle property
  
  See Also:
  
  getByAngle()
  
  byAngleProperty()
- getByAngle
  
  public final double getByAngle()
  
  Gets the value of the byAngle property.
  Property description:
  
  Specifies the incremented stop angle value, from the start, of this RotateTransition.
  It is not possible to change byAngle of a running RotateTransition. If the value of byAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  
  Returns:
  
  the value of the byAngle property
  
  See Also:
  
  setByAngle(double)
  
  byAngleProperty()
- byAngleProperty
  
  public final DoubleProperty byAngleProperty()
  
  Specifies the incremented stop angle value, from the start, of this RotateTransition.
  It is not possible to change byAngle of a running RotateTransition. If the value of byAngle is changed for a running RotateTransition, the animation has to be stopped and started again to pick up the new value.
  Returns:
  
  the byAngle property
  
  See Also:
  
  getByAngle()
  
  setByAngle(double)
- interpolate
  
  protected void interpolate(double frac)
  
  The method interpolate() has to be provided by implementations of Transition. While a Transition is running, this method is called in every frame. The parameter defines the current position with the animation. At the start, the fraction will be 0.0 and at the end it will be 1.0. How the parameter increases, depends on the interpolator, e.g. if the interpolator is Interpolator.LINEAR, the fraction will increase linear. This method must not be called by the user directly.
  
  Specified by:
  
  interpolate in class Transition
  
  Parameters:
  
  frac - The relative position

Class RotateTransition

Property Summary

Properties declared in class javafx.animation.Transition

Properties declared in class javafx.animation.Animation

Nested Class Summary

Nested classes/interfaces declared in class javafx.animation.Animation

Field Summary

Fields declared in class javafx.animation.Animation

Constructor Summary

Method Summary

Methods declared in class javafx.animation.Transition

Methods declared in class javafx.animation.Animation

Methods declared in class java.lang.Object

Property Details

node

duration

axis

fromAngle

toAngle

byAngle

Constructor Details

RotateTransition

RotateTransition

RotateTransition

Method Details

setNode

getNode

nodeProperty

setDuration

getDuration

durationProperty

setAxis

getAxis

axisProperty

setFromAngle

getFromAngle

fromAngleProperty

setToAngle

getToAngle

toAngleProperty

setByAngle

getByAngle

byAngleProperty

interpolate