Class Tooltip

All Implemented Interfaces:
Styleable, EventTarget, Skinnable

@IDProperty("id") public class Tooltip extends PopupControl
Tooltips are common UI elements which are typically used for showing additional information about a Node in the scenegraph when the Node is hovered over by the mouse. Any Node can show a tooltip. In most cases a Tooltip is created and its text property is modified to show plain text to the user. However, a Tooltip is able to show within it an arbitrary scenegraph of nodes - this is done by creating the scenegraph and setting it inside the Tooltip graphic property.

You use the following approach to set a Tooltip on any node:

 Rectangle rect = new Rectangle(0, 0, 100, 100);
 Tooltip t = new Tooltip("A Square");
 Tooltip.install(rect, t);
This tooltip will then participate with the typical tooltip semantics (i.e. appearing on hover, etc). Note that the Tooltip does not have to be uninstalled: it will be garbage collected when it is not referenced by any Node. It is possible to manually uninstall the tooltip, however.

A single tooltip can be installed on multiple target nodes or multiple controls.

Because most Tooltips are shown on UI controls, there is special API for all controls to make installing a Tooltip less verbose. The example below shows how to create a tooltip for a Button control:

 Button button = new Button("Hover Over Me");
 button.setTooltip(new Tooltip("Tooltip for Button"));
Image of the Tooltip control
Since:
JavaFX 2.0
  • Property Details

  • Constructor Details

    • Tooltip

      public Tooltip()
      Creates a tooltip with an empty string for its text.
    • Tooltip

      public Tooltip(String text)
      Creates a tooltip with the specified text.
      Parameters:
      text - A text string for the tooltip.
  • Method Details

    • install

      public static void install(Node node, Tooltip t)
      Associates the given Tooltip with the given Node. The tooltip can then behave similar to when it is set on any Control. A single tooltip can be associated with multiple nodes.
      Parameters:
      node - the node
      t - the tooltip
      See Also:
    • uninstall

      public static void uninstall(Node node, Tooltip t)
      Removes the association of the given Tooltip on the specified Node. Hence hovering on the node will no longer result in showing of the tooltip.
      Parameters:
      node - the node
      t - the tooltip
      See Also:
    • textProperty

      public final StringProperty textProperty()
      The text to display in the tooltip. If the text is set to null, an empty string will be displayed, despite the value being null.
      Returns:
      the text property
      See Also:
    • setText

      public final void setText(String value)
      Sets the value of the text property.
      Property description:
      The text to display in the tooltip. If the text is set to null, an empty string will be displayed, despite the value being null.
      Parameters:
      value - the value for the text property
      See Also:
    • getText

      public final String getText()
      Gets the value of the text property.
      Property description:
      The text to display in the tooltip. If the text is set to null, an empty string will be displayed, despite the value being null.
      Returns:
      the value of the text property
      See Also:
    • textAlignmentProperty

      public final ObjectProperty<TextAlignment> textAlignmentProperty()
      Specifies the behavior for lines of text when text is multiline. Unlike contentDisplay which affects the graphic and text, this setting only affects multiple lines of text relative to the text bounds.
      Returns:
      the text alignment property
      See Also:
    • setTextAlignment

      public final void setTextAlignment(TextAlignment value)
      Sets the value of the textAlignment property.
      Property description:
      Specifies the behavior for lines of text when text is multiline. Unlike contentDisplay which affects the graphic and text, this setting only affects multiple lines of text relative to the text bounds.
      Parameters:
      value - the value for the textAlignment property
      See Also:
    • getTextAlignment

      public final TextAlignment getTextAlignment()
      Gets the value of the textAlignment property.
      Property description:
      Specifies the behavior for lines of text when text is multiline. Unlike contentDisplay which affects the graphic and text, this setting only affects multiple lines of text relative to the text bounds.
      Returns:
      the value of the textAlignment property
      See Also:
    • textOverrunProperty

      public final ObjectProperty<OverrunStyle> textOverrunProperty()
      Specifies the behavior to use if the text of the Tooltip exceeds the available space for rendering the text.
      Returns:
      the text overrun property
      See Also:
    • setTextOverrun

      public final void setTextOverrun(OverrunStyle value)
      Sets the value of the textOverrun property.
      Property description:
      Specifies the behavior to use if the text of the Tooltip exceeds the available space for rendering the text.
      Parameters:
      value - the value for the textOverrun property
      See Also:
    • getTextOverrun

      public final OverrunStyle getTextOverrun()
      Gets the value of the textOverrun property.
      Property description:
      Specifies the behavior to use if the text of the Tooltip exceeds the available space for rendering the text.
      Returns:
      the value of the textOverrun property
      See Also:
    • wrapTextProperty

      public final BooleanProperty wrapTextProperty()
      If a run of text exceeds the width of the Tooltip, then this variable indicates whether the text should wrap onto another line.
      Returns:
      the wrap text property
      See Also:
    • setWrapText

      public final void setWrapText(boolean value)
      Sets the value of the wrapText property.
      Property description:
      If a run of text exceeds the width of the Tooltip, then this variable indicates whether the text should wrap onto another line.
      Parameters:
      value - the value for the wrapText property
      See Also:
    • isWrapText

      public final boolean isWrapText()
      Gets the value of the wrapText property.
      Property description:
      If a run of text exceeds the width of the Tooltip, then this variable indicates whether the text should wrap onto another line.
      Returns:
      the value of the wrapText property
      See Also:
    • fontProperty

      public final ObjectProperty<Font> fontProperty()
      The default font to use for text in the Tooltip. If the Tooltip's text is rich text then this font may or may not be used depending on the font information embedded in the rich text, but in any case where a default font is required, this font will be used.
      Returns:
      the font property
      See Also:
    • setFont

      public final void setFont(Font value)
      Sets the value of the font property.
      Property description:
      The default font to use for text in the Tooltip. If the Tooltip's text is rich text then this font may or may not be used depending on the font information embedded in the rich text, but in any case where a default font is required, this font will be used.
      Parameters:
      value - the value for the font property
      See Also:
    • getFont

      public final Font getFont()
      Gets the value of the font property.
      Property description:
      The default font to use for text in the Tooltip. If the Tooltip's text is rich text then this font may or may not be used depending on the font information embedded in the rich text, but in any case where a default font is required, this font will be used.
      Returns:
      the value of the font property
      See Also:
    • showDelayProperty

      public final ObjectProperty<Duration> showDelayProperty()
      The delay between the mouse entering the hovered node and when the associated tooltip will be shown to the user. The default delay is 1000ms.
      Default value:
      1000ms
      Returns:
      show delay property
      Since:
      9
      See Also:
    • setShowDelay

      public final void setShowDelay(Duration showDelay)
      Sets the value of the showDelay property.
      Property description:
      The delay between the mouse entering the hovered node and when the associated tooltip will be shown to the user. The default delay is 1000ms.
      Default value:
      1000ms
      Parameters:
      showDelay - the value for the showDelay property
      Since:
      9
      See Also:
    • getShowDelay

      public final Duration getShowDelay()
      Gets the value of the showDelay property.
      Property description:
      The delay between the mouse entering the hovered node and when the associated tooltip will be shown to the user. The default delay is 1000ms.
      Default value:
      1000ms
      Returns:
      the value of the showDelay property
      Since:
      9
      See Also:
    • showDurationProperty

      public final ObjectProperty<Duration> showDurationProperty()
      The duration that the tooltip should remain showing for until it is no longer visible to the user. If the mouse leaves the control before the showDuration finishes, then the tooltip will remain showing for the duration specified in the hideDelayProperty(), even if the remaining time of the showDuration is less than the hideDelay duration. The default value is 5000ms.
      Default value:
      5000ms
      Returns:
      the show duration property
      Since:
      9
      See Also:
    • setShowDuration

      public final void setShowDuration(Duration showDuration)
      Sets the value of the showDuration property.
      Property description:
      The duration that the tooltip should remain showing for until it is no longer visible to the user. If the mouse leaves the control before the showDuration finishes, then the tooltip will remain showing for the duration specified in the hideDelayProperty(), even if the remaining time of the showDuration is less than the hideDelay duration. The default value is 5000ms.
      Default value:
      5000ms
      Parameters:
      showDuration - the value for the showDuration property
      Since:
      9
      See Also:
    • getShowDuration

      public final Duration getShowDuration()
      Gets the value of the showDuration property.
      Property description:
      The duration that the tooltip should remain showing for until it is no longer visible to the user. If the mouse leaves the control before the showDuration finishes, then the tooltip will remain showing for the duration specified in the hideDelayProperty(), even if the remaining time of the showDuration is less than the hideDelay duration. The default value is 5000ms.
      Default value:
      5000ms
      Returns:
      the value of the showDuration property
      Since:
      9
      See Also:
    • hideDelayProperty

      public final ObjectProperty<Duration> hideDelayProperty()
      The duration in which to continue showing the tooltip after the mouse has left the node. Once this time has elapsed the tooltip will hide. The default value is 200ms.
      Default value:
      200ms
      Returns:
      the hide delay property
      Since:
      9
      See Also:
    • setHideDelay

      public final void setHideDelay(Duration hideDelay)
      Sets the value of the hideDelay property.
      Property description:
      The duration in which to continue showing the tooltip after the mouse has left the node. Once this time has elapsed the tooltip will hide. The default value is 200ms.
      Default value:
      200ms
      Parameters:
      hideDelay - the value for the hideDelay property
      Since:
      9
      See Also:
    • getHideDelay

      public final Duration getHideDelay()
      Gets the value of the hideDelay property.
      Property description:
      The duration in which to continue showing the tooltip after the mouse has left the node. Once this time has elapsed the tooltip will hide. The default value is 200ms.
      Default value:
      200ms
      Returns:
      the value of the hideDelay property
      Since:
      9
      See Also:
    • graphicProperty

      public final ObjectProperty<Node> graphicProperty()
      An optional icon for the Tooltip. This can be positioned relative to the text by using the content display property. The node specified for this variable cannot appear elsewhere in the scene graph, otherwise the IllegalArgumentException is thrown. See the class description of Node for more detail.
      Returns:
      the graphic property
      See Also:
    • setGraphic

      public final void setGraphic(Node value)
      Sets the value of the graphic property.
      Property description:
      An optional icon for the Tooltip. This can be positioned relative to the text by using the content display property. The node specified for this variable cannot appear elsewhere in the scene graph, otherwise the IllegalArgumentException is thrown. See the class description of Node for more detail.
      Parameters:
      value - the value for the graphic property
      See Also:
    • getGraphic

      public final Node getGraphic()
      Gets the value of the graphic property.
      Property description:
      An optional icon for the Tooltip. This can be positioned relative to the text by using the content display property. The node specified for this variable cannot appear elsewhere in the scene graph, otherwise the IllegalArgumentException is thrown. See the class description of Node for more detail.
      Returns:
      the value of the graphic property
      See Also:
    • contentDisplayProperty

      public final ObjectProperty<ContentDisplay> contentDisplayProperty()
      Specifies the positioning of the graphic relative to the text.
      Returns:
      the content display property
      See Also:
    • setContentDisplay

      public final void setContentDisplay(ContentDisplay value)
      Sets the value of the contentDisplay property.
      Property description:
      Specifies the positioning of the graphic relative to the text.
      Parameters:
      value - the value for the contentDisplay property
      See Also:
    • getContentDisplay

      public final ContentDisplay getContentDisplay()
      Gets the value of the contentDisplay property.
      Property description:
      Specifies the positioning of the graphic relative to the text.
      Returns:
      the value of the contentDisplay property
      See Also:
    • graphicTextGapProperty

      public final DoubleProperty graphicTextGapProperty()
      The amount of space between the graphic and text
      Returns:
      the graphic text gap property
      See Also:
    • setGraphicTextGap

      public final void setGraphicTextGap(double value)
      Sets the value of the graphicTextGap property.
      Property description:
      The amount of space between the graphic and text
      Parameters:
      value - the value for the graphicTextGap property
      See Also:
    • getGraphicTextGap

      public final double getGraphicTextGap()
      Gets the value of the graphicTextGap property.
      Property description:
      The amount of space between the graphic and text
      Returns:
      the value of the graphicTextGap property
      See Also:
    • isActivated

      public final boolean isActivated()
      Gets the value of the activated property.
      Property description:
      Typically, the tooltip is "activated" when the mouse moves over a Control. There is usually some delay between when the Tooltip becomes "activated" and when it is actually shown. The details (such as the amount of delay, etc) is left to the Skin implementation.
      Returns:
      the value of the activated property
      See Also:
    • activatedProperty

      public final ReadOnlyBooleanProperty activatedProperty()
      Typically, the tooltip is "activated" when the mouse moves over a Control. There is usually some delay between when the Tooltip becomes "activated" and when it is actually shown. The details (such as the amount of delay, etc) is left to the Skin implementation.
      Returns:
      the activated property
      See Also:
    • getClassCssMetaData

      public static List<CssMetaData<? extends Styleable,?>> getClassCssMetaData()
      Gets the CssMetaData associated with this class, which may include the CssMetaData of its superclasses.
      Returns:
      the CssMetaData
      Since:
      JavaFX 8.0
    • getCssMetaData

      public List<CssMetaData<? extends Styleable,?>> getCssMetaData()
      The CssMetaData of this Styleable. This may be returned as an unmodifiable list.
      Specified by:
      getCssMetaData in interface Styleable
      Overrides:
      getCssMetaData in class PopupControl
      Returns:
      the CssMetaData
      Since:
      JavaFX 8.0